Aluminium ISO Enter Keycap

£20.00£90.00

Specifications

Material: Aluminium (anodized keycaps), Brass (Mirror Polished Brass Keycaps)
Profile: GMK Cherry ISO Enter
Stem: Cherry MX
Colours: Black, Silver, Polished Brass
Quality: A-Stock, B-Stock (See below specification)
Weight: Brass – 20g, Aluminium – 6g – Please note that the brass version may need a heavier spring to be swapped in.

Join my Discord Server to talk about this and other products!

Clear
SKU: alu-iso Categories: ,

Description

Quality Expectations

A-Stock // Anodized Aluminium Keycaps

  • No blemishes on top or side of keycaps
  • Potential for some small blemishes in the anodization on the underside of the keycap, these will not be visible when installed on a keyboard
  • Machining marks on the underside of the keycap

A-Stock // Mirror Polish Brass Keycaps

  • No blemishes on top or side of keycaps
  • Machining marks on the underside of the keycap

Please note: Brass keycaps are uncoated raw brass and will patina over time, this can be prevented by applying a clear coating such as a spray lacquer. See main product image, top left is brass keycap after 4 months of patina build up, bottom left is brass keycap with no patina. 

B-Stock // Anodized Aluminium Keycaps

  • No blemishes on top of keycaps
  • Possible small blemishes to side of keycap
  • Potential for some small blemishes in the anodization on the underside of the keycap, these will not be visible when installed on a keyboard
  • Machining marks on the underside of the keycap

B-Stock // Mirror Polish Brass Keycaps

  • No blemishes on top or side of keycaps
  • Possible small blemishes to side of keycap
  • Possibility of patina formed on side of keycap – should polish out with cleaner such as Brasso
  • Machining marks on the underside of the keycap

Please note: Brass keycaps are uncoated raw brass and will patina over time, this can be prevented by applying a clear coating such as a spray lacquer. See main product image, top left is brass keycap after 4 months of patina build up, bottom left is brass keycap with no patina. 

Fitment

We endeavour to fit the highest possible manufacturing tolerances whenever possible however due to the sheer quantity of switches and stabilisers on the market today from many different manufacturers, it is hard to guarantee the stem will fit perfectly first time. This is easily corrected with very simple tools that most keyboard enthusiasts should have to hand.

Stem fits too loose

Use a pair of needle nose pliers (ideally wrapped in PVC electrical tape to avoid leaving marks) to gently squeeze the stem together. Very little force should be needed to ensure a better fit. The tolerances are as little as 0.1mm.

Stem fits too tight

Use a small flat head screwdriver to lever against the inside of the stem both horizontally and vertically. Very little force should be needed to ensure a better fit. The tolerances are as little as 0.1mm.

Additional information

Colour

Silver Anodized, Black Anodized, Brass Mirror Polished, Copper

Quality

A-Stock, B-Stock

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.